NEW - APEX 2-Channel Class D Amplifiers

NEW - APEX 2-Channel Class D Amplifiers

New Range · APEX Series Pro · 2-Channel Class D

APEX Pro 2‑Channel

Three new stereo amplifiers built for high-output, competition-level builds — genuine 1 Ohm per-channel stability from 500W to 900W RMS, for full-range and pro-audio speaker systems that demand more.

EDGE APEX500, 700 and 900.2PRO-E6 amplifiers on display in-store — Coming Soon

APEX Pro is the amplifier of choice for high-output, competition-level builds. Designed to partner with high-power subwoofers and pro audio speakers, these amplifiers deliver the raw, aggressive power that extreme systems demand.

If your build is built around maximum volume and maximum impact, APEX Pro is the engine behind it — built for those who want more, and then a little more on top. Across the range, each amplifier combines high-output stereo amplification with a compact, installation-friendly footprint, so demanding modern speakers get the power they need without eating into valuable install space.

Where APEX Pro Sits in the EDGE Line-Up

EDGE's amplifier range spans several distinct series, each built around a different priority. APEX Pro is the series built purely around output — the amplifier to reach for when a full-range door build or pro-audio system needs serious stereo power without giving up the second channel.

DB DBX Street Xtreme Unlimited APEX

Every APEX Pro amplifier is built on a custom-designed heavy-duty aluminium heatsink and a proprietary EDGE PCB, with side-mounted controls and gain, HPF/LPF and phase adjustment tuned around the connected speakers — a genuinely installation-friendly platform, not just a spec sheet.

1 Ohm Stereo Stability: Why It Matters

The headline spec across the range is 1 Ohm stability on both channels, at the same time. That's not a bridged-mode party trick — it's full stereo operation with each channel independently capable of driving down to 1 Ohm.

For speaker-door and pro-audio installs, this matters in a very practical way. Multiple drivers per side are routinely wired down to low impedances to extract maximum output from a single amplifier channel. An amplifier that only holds up at 2 or 4 Ohms limits how a system can be wired and how much output is realistically available. 1Ω stability per channel removes that ceiling, giving installers room to wire for output without needing a second amplifier just to get there.

The result is a clean progression across the range — 500W, 700W and 900W RMS per channel at 1Ω — so the amplifier can be matched to the system, rather than the system being limited by the amplifier.

APEX500.2PRO-E6
500W x2
RMS @ 1 Ohm per channel
APEX700.2PRO-E6
700W x2
RMS @ 1 Ohm per channel
APEX900.2PRO-E6
900W x2
RMS @ 1 Ohm per channel

Meet the Range

APEX500.2PRO-E6

Entry of Range · 2000W
EDGE APEX500.2PRO-E6 on display stand at the EDGE showroom

The entry point into the APEX Pro range, and still built to move large full-range and pro-audio speakers with authority. 2 x 500W RMS at 1Ω gives real headroom for low-impedance door builds, from a chassis just 192mm deep.

Configuration 2-Channel, Class D
RMS @ 4Ω Stereo 2 x 190W
RMS @ 2Ω Stereo 2 x 310W
RMS @ 1Ω Stereo 2 x 500W
Maximum Power 2000W
Recommended Fuse 100A
Frequency Response 25Hz–21kHz
Crossover HP / FULL / LP, 20Hz–12kHz
Dimensions (H x W x D) 55 x 150 x 192mm
View APEX500.2PRO-E6

APEX700.2PRO-E6

Mid Range · 2800W
EDGE APEX700.2PRO-E6 on display stand at the EDGE showroom

The middle step in the range, built for installs that have outgrown 500W but don't need the top-tier output of the 900. 2 x 700W RMS at 1Ω makes it a strong fit for larger full-range door setups running multiple drivers per side.

Configuration 2-Channel, Class D
RMS @ 4Ω Stereo 2 x 270W
RMS @ 2Ω Stereo 2 x 470W
RMS @ 1Ω Stereo 2 x 700W
Maximum Power 2800W
Recommended Fuse 150A
Frequency Response 25Hz–21kHz
Crossover HP / FULL / LP, 20Hz–12kHz
Dimensions (H x W x D) 55 x 150 x 209mm
View APEX700.2PRO-E6

APEX900.2PRO-E6

Range Flagship · 3600W
EDGE APEX900.2PRO-E6 on display stand at the EDGE showroom

The flagship of the range, built for the most demanding full-range and pro-audio door systems. 2 x 900W RMS at 1Ω per channel, capable of over 1800W RMS when bridged, for installs that need maximum output.

Configuration 2-Channel, Class D
RMS @ 4Ω Stereo 2 x 350W
RMS @ 2Ω Stereo 2 x 510W
RMS @ 1Ω Stereo 2 x 900W
Maximum Power 3600W
Recommended Fuse 180A
Frequency Response 25Hz–21kHz
Crossover HP / FULL / LP, 20Hz–12kHz
Dimensions (H x W x D) 55 x 150 x 261mm
View APEX900.2PRO-E6

Compact Class D Engineering

Getting 500–900W per channel at 1Ω out of a chassis this size comes down to the efficient Class D platform each amplifier is built on. It keeps physical footprint down without giving up the current delivery needed for low-impedance stereo loads — a genuine consideration for door installs and pro-audio racks where space is at a premium.

Class D badge Pro-Audio badge High Pass Filter badge Low Pass Filter badge

Each amplifier uses a custom-designed aluminium heatsink to manage the thermal load that comes with sustained high output, and the chassis itself has been laid out with installation in mind — laser-etched EDGE branding, side-mounted controls, and Power/Protect status LEDs positioned for easy access once the amplifier is in place.

EDGE APEX Pro amplifier on the bench with the full APEX speaker range

Custom Aluminium Heatsinks

Purpose-designed to manage heat under sustained high-output stereo load.

Proprietary EDGE PCB

Side-mounted controls and a robust board layout built for real-world installs.

Power & Protect LEDs

Clear status indication for fast diagnosis in the field.

HP / FULL / LP Crossover

Onboard crossover from 20Hz–12kHz, plus phase and remote gain control, for flexible integration.

High Output Without the Premium Price Tag

APEX Pro isn't positioned as a premium audiophile line — it's built for output. Where other EDGE series are about control, refinement or everyday value, APEX Pro is aimed squarely at people who want serious, usable stereo power without paying a premium-tier price for it.

That makes it a straightforward fit for full-range speaker builds, large speaker-door installs, and pro-audio setups where the priority is getting enough clean stereo power to the drivers — not chasing the last percentage point of audiophile polish.

Explore the APEX Pro Range

Three amplifiers, one clear job: serious stereo power for systems that need it. Find the right model for your build below.

© 2026 EDGE Car Audio. Specifications subject to change.